Hyundai r35z-7 Workshop Manual page 225

2) ENGINE SPEED
(1) Measure the engine speed at the
maximum RPM.
The engine speed must meet standard
RPM; if not, all other operational
performance data will be unreliable. It is
essential to perform this test first.
(2) Preparation and measurement
Warm up the machine, until the engine
coolant temperature reaches 50
more, and the hydraulic oil is 50 5 C.
Set the accel lever at the maximum
stroke.
Measure the engine RPM.
(3) E E valuation
The measured speeds should meet the
following specifications.
Model
R35Z-7
C or
Engine speed
Low idle
High idle
6-4
Standard
1100 100
2350 50
Unit : t / rpm
Remark