Hyundai r35z-7 Workshop Manual page 298

3) DISASSEMBLY
(1)
Disassembly of spools(Pilot type)
Loosen hexagon socket head bolts(10)
with washer.
(Hexagon wrench : 5mm)
Remove the pilot cover(8).
Pay attention not to lose the O-ring(7)
under the pilot cover.
Remove the spool assembly(2) from the
body by hand slightly.
When extracting each spool from its
body, pay attention not to damage the
body.
When extracting each spool assembly, it
must be extracted from spring side only.
When any abnormal parts are found,
replace it with completely new spool
assembly.
When disassembled,
components for identification so that they
can be reassembled correctly.
tag the
7-38
8
7
10
R35Z77MCV04
2
R35Z77MCV05