Hyundai r35z-7 Workshop Manual page 339

2 2 ) ASSEMBLE THE TRAVEL MOTOR BY
THE FOLLOWING PROCEDURE
(1) Apply grease to floating seal (1-2) and
install it on flange holder (1-1).
Tools required :
Floating seal assembly jig (S-9)
(2) Press fit angular bearings (1-3) to housing
(1-6).
Tools required :
Angular bearings press fitting jig (S-10)
(3) Apply grease to the second floating seal
and place it on the concentric circle. Install
it on housing (1-6).
Tools required :
Floating seal assembly jig (S-9)
Apply lubricating oil on the sliding surface
(4)
of floating seal after make the surface
clean by rags.
Install flange holder (1-1) in housing (1-6).
Tools required :
Flange holder press fitting jig (S-11)
If there are foreign articles on the sliding
surface of floating seal (1-2), it causes oil
leak.
7-79
1-2
1-1
R35Z77TM50
R35Z77TM51
1-2
1-6
R35Z77TM52
R35Z77TM53