Hyundai r35z-7 Workshop Manual page 340

(5) Tighten angular bearing (1-3) with ring nut
(1-4)
Tools required :
Torque wrench (No. 3)
Ring nut tightener (S-6)
Tightening torque 23.9 1.0 kgf m
(6) Tighten plug (1-5).
The seal tape is not allowed to wrap for
assembling of this plug.
Tools required :
Torque wrench (No. 1)
Hexagonal bit for torque wrench (S-9)
Tightening torque 3.5 0.5 kgf m
(7) Caulk plug (1-5) two positions with punch
to lock.
Tools required :
Hammer (No. 14)
Punch (No. 18)
Place steel balls (1-7) (99 pcs) in.
(8)
If it is difficult to place steel balls in, beat
on the side of housing (1-6) by using of
plastic hammer.
(173 7.2 lbf ft)
(25.2 3.6 lbf ft)
1-5
7-80
1-4
1-7
R35Z77TM54
R35Z77TM55
R35Z77TM56
R35Z77TM57