(11)
Install the rotary group.
Assemble the rotary group along the shaft
spline.
(12)
Install the retaining ring (For shafts; 20),
and install the shim.
Pliers for retaining rings.
(For shafts; retaining ring for 20)
Shim
Retaining
ring
Cylinder block
(13)
Assemble the control spring.
Apply grease to the spherical portion of
the spring seat before assembling.
(14)
Assemble the two springs (inner and
outer) and the guide.
Shaft
7-24
R35Z77MP53
R35Z77MP54
R35Z77MP55
R35Z77MP56