Hyundai r35z-7 Workshop Manual page 363

(17) Assemble bushing(18) to plate and pass
cord and tube through it.
Provide margin necessary to operation.
(18) Determine handle direction, tighten lock
nut(21) to specified torque to fix handle.
(19) Apply grease to rotating section of joint
and contacting faces of disk and push rod.
(20)
Assemble lower end of bellows to casing.
(21)
Inject volatile rust-preventives through all
ports and then put blind plugs in ports.
7-103
1408DA67
1408DA68
1408DA69
25038RL04