Hyundai r35z-7 Workshop Manual page 319

While paying attention to the location of
§
the pin (2-25), install the cover (2-21) and
other associated parts to the case (2-1).
Exercise care so that the pin (2-25) and
the valve plate (2-24) will not fall.
§ Loosely tighten the socket head bolts (2-
27), then using a torque wrench, tighten
them to the specified torque.
Tightening torque : 13 0.7 kgf m
(2) A A ssembling the reduction gear
Press-fit the oil seal (1-7).
Prior to press-fit, apply grease to the oil
seal mounting area of the housing and
the periphery of the oil seal.
Press-fit the taper roller bearing (1-8) and
install the plug (1-35).
Apply grease to the inner race of the
taper roller bearing (1-6) assembled on
the pinion shaft (1-2).
(94.4 5 lbf ft)
7-59
2-27
1-6
1-7
1-35
1-7
2-21
R35Z77SM02
R35Z77SM27
R35Z77SM28
1-2
R35Z77SM41