Hyundai r35z-7 Workshop Manual page 333

(16) Remove plugs (1-27), (1-8). Attach
eyebolt (PF 1/4) to the threaded hole of
plug (1-27) and insert pry-bar (length 1
[m]) in the eye hole, and turn the bar until
wire (1-26) can be seen through the
threaded hole of plug (1-8). Draw the wire
outside when the wire end can be seen.
Tools required :
Torque wrench (No. 1, No. 2)
Eyebolt PF 1/4 (S-2)
Hexagonal bit for torque wrench (No. 7,
No. 8)
Round bar dia. 20 1000mm (S-3)
Screw driver (No. 13), cutting pliers
(No. 16)
(17) Hook eyebolt and remove cover (1-24)
Tools required :
Eyebolt PF 1/4 (S-2)
Round bar dia. 20 1000mm (S-3)
(18)
Remove sun gear assy (1-15), holder (1-
17), planetary gear A (1-18), needle
bearing (1-19), inner race (1-20), drive
gear (1-22) and thrust plate (1-23).
7-73
R35Z77TM17
R35Z77TM18
1-15 1-17
1-19
1-20
1-18
1-22
1-23
R35Z77TM19