Hyundai r35z-7 Workshop Manual page 328

2. DISASSEMBLY
1) GENERAL PRECAUTIONS
(1) Before disassembling the TM motors, check the items to be inspected and, for remedy against
trouble, closely examine the nature of the trouble, so that the motor can be disassembled
effectively.
(2) To disassemble the motor, use the disassembling procedures described in section 2-2, and select
a clean place.
(3) Place a rubber or vinyl sheet or other such protective materials on your working bench to protect
the surface of the motor to be serviced.
(4)
During disassembly, give a match mark to the mating surfaces of each part.
(5) Arrange removed parts in order so that they will not become damaged or missing during
disassembly.
(6) Once seals have been disassembled, they should be replaced even if damage is not observed.
Have replacement seals ready on hand before starting your disassembling job.
7-68