Hyundai r35z-7 Workshop Manual page 228

5) TRAVEL DEVIATION
(1) Measure the deviation by the tracks from
a 20m straight line.
(2) Preparation
Adjust the tension of both tracks to be
equal.
Provide a flat, solid test yard 20m in
length, with extra length of 3 to 5m on
both ends for machine acceleration and
deceleration.
Hold the bucket 0.3 to 0.5m above the
ground with the arm and bucket rolled in.
Keep the hydraulic oil temperature at 50
5 C.
( ( 3) M M easurement
Measure the amount of mistracking at
high and low travel speeds.
Start traveling the machine in the
acceleration zone with the travel levers at
full stroke.
Measure the distance between a straight
20m line and the track made by the
machine.(Dimension a)
After measuring the tracking in forward
travel, turn the upperstructure 180 and
measure that in reverse travel.
Repeat steps
calculate the average values.
( ( 4) E E valuation
Mistrack should be within the following specifications.
Model
R35Z-7
and three times and
Standard
200 below
3~5m extra length
Maximum allowable
240
6-7
0.3~0.5m
R35Z76MC04
3~5m extra length
a
7-7(2) 140-7
Unit : mm / 20m
Remarks