Hyundai r35z-7 Workshop Manual page 338

3. REASSEMBLY
1) GENERAL PRECAUTIONS
(1) Reassemble in a work area that is clean and free from dust and grit.
(2) Handle parts with bare hands to keep them free or linty contaminants.
(3)
Repair or replace the damage parts.
Each parts must be free of burrs its corners.
(4) Do not reuse O-rings, oil seal and floating seal that were removed in disassembly.
Provide the new parts.
(5) Wash all parts thoroughly in a suitable solvent.
Dry thoroughly with compressed air
Do not use the cloths.
(6) When reassembling oil motor components of TM motor, be sure to coat the sliding parts of the
motor and valve with fresh hydraulic oil.(NAS class 9 or above).
(7) Use a torque wrench to tighten bolts and plugs, to the torque specified as follows.
7-78