Hyundai r35z-7 Workshop Manual page 387

(3) Overall assemble
Place a V-block on a rigid work bench.
Mount the tube assembly(1) on it and fix
the assembly by passing a bar through
the clevis pin hole to lock the assembly.
Insert the rod assembly in to the tube
assembly, while lifting and moving the
rod assembly with a crane.
Be careful not to damage piston seal by
thread of tube assembly.
Match the bolt holes in the cylinder head
flange to the tapped holes in the tube
assembly and tighten socket bolts to a
specified torque.
Refer to the table of tightening torque.
Lift
Straight
Appply liquid packing
2
7-127
Fix with a bar
Hook spanner
Turn clockwise
Cover here
with rag
R5577CY49
R5577CY50