Hyundai r35z-7 Workshop Manual page 320

Install the pinion shaft (1-2) and other
associated parts. Install the taper roller
bearing inner race (1-7).
Prior to assembling the pinion shaft (1-2),
etc. apply grease to the lip of the oil seal
(1-6).
Install the collar (1-9) and the plate (1-8).
Install the following parts on the holder
(1-10).
(1-11) Thrust washer
(1-12) Inner race
(1-13) Needle bearing
(1-14) Planetary gear B
(1-15) Thrust plate
(1-16) Screw
Apply loctite 242 to the screw prior to
tightening it.
Tightening torque : 0.4 0.05 kgf¡⁄m
2.9 0.3 lbf¡⁄ft
Install the holder (1-10) and other
associated parts.
1-8
1-9
1-16
1-12
1-13
1-14
1-11
7-60
1-1
1-2
R35Z77SM25
R35Z77SM24
1-15
1-10
R35Z77SM23
1-10
R35Z77SM22