Hyundai r35z-7 Workshop Manual page 278

(16)
Remove the parallel pin and the sleeve.
(17)
Remove the minimum flow stopper.
Remove the retaining ring. (For holes; 22)
Pliers for retaining rings.
(For holes ; retaining ring for 22)
(18)
Remove the guide, the coned disk
springs, the distance piece, and shim.
(19)
Remove the relief valve.
Remove the hexagon nut.
Spanner (24 mm)
Since the pressure has set, you may
remove this assembly, only when
necessary.
7-18
R35Z77MP29
R35Z77MP30
R35Z77MP31
R35Z77MP32