Hyundai r35z-7 Workshop Manual page 335

(23) Attach jig between flange holder (1-1) and
housing (1-6), and tighten 3 bolts M14¡¿
2.0 uniform from the housing side.
Tools required :
Torque wrench (No. 3)
Hexagonal bit for torque wrench (No. 10)
Housing disassembly (S-5)
(24) Remove plug (1-5).
Tools required :
Torque wrench (No. 1)
Hexagonal bit for torque wrench (No. 9)
(25) Removing ring nut (1-4).
Tools required :
Torque wrench (No. 3)
Ring nut tightener (S-6)
If fix them by vise, fix around of outside of
flange holder absolutely.
(26) Apply pry-bar to the groove for steel balls
(1-7), and remove angular bearing (1-3)
striking it by hammer.
Tools required :
Hammer (No. 14)
Round bar dia. 10 150mm (S-7)
When removing, strike the groove turning.
If strike the groove on one portion,
angular bearing wouldn't be removed.
7-75
1-6
R35Z77TM24
1-5
R35Z77TM25
R35Z77TM26
R35Z77TM27