Hyundai r35z-7 Workshop Manual page 281

5. ASSEMBLING PROCEDURE
1)
ASSEMBLE THE MAIN PUMP
(1) Assemble the minimum flow stopper.
Install the guide, the coned disk springs,
the distance piece, and the shim into the
housing.
* Pay attention to the direction of the
coned disk spring.
(2) Install the retaining ring. (For holes; 22)
Pliers for retaining rings.
(For holes; retaining ring for 22)
(3)
Install the parallel pin and the sleeve into
the housing.
Guide
Coned disk
spring
Shim
Assembling
direction
7-21
R35Z77MP41
R35Z77MP43
R35Z77MP44