Overload Function In The Lower Speed Range (Ol2) For 23P6; Figure 3: Output Current Depending On The Output Frequency 23P6 - KEB COMBIVERT P6 Instructions For Use Manual

OVERLOAD fUNCTION

3.3.1.3 Overload function in the lower speed range (OL2) for 23P6

In the lower speed range the permissible output current is depending on the output fre-
quency. Depending on the setting of parameter is14, if the output current is exceeded,
the error E.OL2 is triggered or the output current is limited.
Legend
Figure 3:
350
300
250
200
150
100
50
0
0
23P6, 2 kHz switching frequency
23P6, 4 kHz switching frequency
Output current depending on the output frequency 23P6
10
Output frequency in Hz
20
33