Table of Contents
Advertisement
DESCRIPTION Of THE TERMINALS
NOTICE
NOTICE
Resolver specification
Number of poles
Excitation voltage
Excitation frequency
Transmission ratio
Phase shifting
Table 14:
Resolver specification
66
Observe pin assignment !
The pin assignment for incremental encoders is different from that of the
COMBIVERT F5 series! The encoder cables 00F4V09-xxxx are availa-
ble for 5 V incremental encoders (Heidenhain, Kübler, Sick-Stegmann).
Connection of third-party motors !
For resolver connection KEB signal names are used in the above table.
They match with KEB motors and KEB cables. If connecting third-party
motors, other definitions of the signal names are often used, which can
result in a reverse rotational direction. Connection instructions upon re-
quest.
2-pole (Tamagawa calls these "1X-BRX")
2.55 V
, current consumption max. 30 mA
RMS
10 kHz
0.5 ± 10 %
0° ± 5°
RMS
Advertisement
Table of Contents
