Function Keys And Toolbar; Initial Start-Up; Switch On; Figure 2: Power Indicator - KEB COMBIVERT G6 Programming Manual

LC DISPLAy OPeRATION

3.1.1.2 Function keys and toolbar

The function keys F1...F4 are variable assigned depending on the menu item. The tool-
bar displays current assignment of the function keys F1 ... F4.
The following assignment may take the keys:
Display
DecHex
Menu
Up
Down
Table 1:

3.2 Initial start-up

3.2.1 Switch on

Figure 2:
function
Representation changes between decimal and hexadecimal display
jumps to the main menu
jumps to the top of the current page, repeatedly pressing scrolls back a
page
jumps to the top of the current page, repeatedly pressing scrolls back a
page
assignment of the function keys
CP01 2203h Set:1
actual frequency display
0.0000 Hz
DecHex
Power indicator
The menu with the inverter starts can be set in the settings menu under "Start
mode".
At first switch on with factory setting the
operator indicates the actual frequency in
customer parameters menu (CP-mode).
To make the basic settings change to the
main menu as follows:
<ESC> → changes to the parame-
ter selection
<F1> → jumps to the main menu
11