Table of Contents
Advertisement
PRODUCT DESCRIPTION
2.3 Product features
This instruction for use describes the following devices:
Unit type:
Series:
Power range:
Housing:
The COMBIVERT P6 is an "all-in-one" drive controllerr for pitch applications, which is
characterised by the following features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Special functions for the pitch application:
•
•
•
•
•
•
•
Drive controller
COMBIVERT P6
18...42 kW / 400 V
G, R
Control of induction, synchronous and DC motors
Braking resistor integrated
Charging circuit for ultracapacitors / rechargeable batteries
Monitoring of Ultracapacitors / rechargeable batteries
Control and supply for an electromechanical brake on the motor shaft
Two encoder interfaces for motor encoder and blade encoder
Motor temperature monitoring with PTC, KTY or Pt1000 (software-dependent)
A complete PLC
Digital inputs and outputs, relay output (potential-free) for safety chain, Pt100 inputs
Fieldbus interface
Integrated EMC filter
Wide operating temperature range
High vibration resistance
Through panel mounting heat sink
Temperature-controlled fans, monitored and easily replaceable
Freely programmable PLC (according to IEC 61131) with prepared function blocks
Safety run with backup from ultracapacitors / batteries
Speed control or position control
Adjustable torque limit, ramps and s-curves (to protect gearbox)
Detection of mains failure and phase failure
Automatic reaction (safety run) in case of encoder failure and other errors
General protection functions of the COMBIVERT series against overcurrent, short
circuit, earth fault and overtemperature
23
Advertisement
Table of Contents
