Shield Connection; D-Sub Sockets And Plugs - KEB COMBIVERT P6 Instructions For Use Manual

DESCRIPTION Of THE INDICATORS AND CONTROLS

6.2.2 Shield connection

Shield connection rails 3x10 mm are available for strain relief / shield connection of the
control cables. Commercially available shield connection clamps (screw- or spring type)
of suitable size or cable ties can be used on them.

6.2.3 D-SUb sockets and plugs

All D-SUB connectors have screw sockets with UNC 4-40 thread (tightening torque
0.4 Nm).
60