DEVICE OVERVIEW
4.9 Accessories
4.9.1 Shield connection rail
For EMC conform installation of the power cables a shield connection rail is available as
option. Commercially available shield connection clamps for rails 3x10 mm can be used.
The Shield connection clamps (screw or spring type) must match the to cable diameter
and are therefore not included.
Figure 18:
Figure 19:
Accessory
Shield connection rail
Table 10:
Shield connection rail housing G
Shield connection rail housing R
Housing
G
R
Shield connection rail
Material number
00P6ZGG-0002
00P6ZGR-0002
43