Installing Cutterbar Spindles - MacDon R113 Operator's Manual

9. Remove spindle (A) from cutterbar.

Installing Cutterbar Spindles

DANGER
To avoid bodily injury or death from unexpected start-up or fall of a raised machine, stop engine, remove
key, and engage header lift cylinder lock-out valves before going under machine for any reason.
CAUTION
Cutter blades have two cutting edges. Exercise caution when working around the blades. Blades are sharp
and can cause serious injury. Wear gloves when handling blades.
169820
MAINTENANCE AND SERVICING
148
Figure 4.53: Left-Hand Spindle
Revision A