Maintenance Requirements; Maintenance Schedule/Record - MacDon D65 Operator's Manual

6.4 Maintenance Requirements

The following maintenance schedule is a listing of periodic maintenance procedures, organized by service intervals.
Regular maintenance is the best insurance against early wear and untimely breakdowns. Following this schedule
will increase machine life.
For detailed instructions, refer to the specific headings in this section. Use the fluids and lubricants specified in
section 6.3.2 Recommended Fluids and Lubricants, page
Log hours of operation and use the Maintenance Record on the next page to keep a record of scheduled
maintenance. You will want to make copies of the Maintenance Record page for this purpose.
Service Intervals: The recommended service intervals are in hours of operation. Where a service interval is given
in more than one time frame, e.g., "100 hours or Annually", service the machine at whichever interval is reached first.
Recommended intervals are for average conditions. Service the machine more often if operated under
adverse conditions (severe dust, extra heavy loads, etc.).
CAUTION
Carefully follow safety messages given under Section
section 6.2 Recommended Safety Procedures, page

6.4.1 Maintenance Schedule/Record

Copy this page to continue record.
Maintenance
Action:
Record
Hour Meter Reading
Date
Serviced By
FIRST USE, Refer to Section
END OF SEASON, Refer to Section
10 HOURS OR DAILY 17
Hydraulic Hoses and

Lines 18
Knife Sections, Guards,

and Hold-Downs
18
 Tire Pressure
18
Knife (except in sandy

conditions) 18
25 HOURS
17. Whichever occurs first.
18. A record of daily maintenance is not normally required but is at the Owner's/Operator's discretion.
169594
MAINTENANCE AND SERVICING
IMPORTANT
 - Check
6.4.2 Break-In Inspections, page 127
6.4.4 End of Season Service, page 128
125
113.
6.1 Preparation for Servicing, page 111
112.
 - Lubricate
▲ - Change
and
Rev. C