Repositioning Fore-Aft Cylinder On Double Reel - MacDon D65 Operator's Manual

Repositioning Fore-Aft Cylinder on Double Reel

The reel can be moved approximately 9 in (227 mm) further aft by repositioning the cylinders on the reel arms. This
may be desirable when straight-combining canola. To reposition the cylinders on a double reel, follow these steps.
WARNING
Stop windrower engine and remove key before making adjustments to machine. A child or even a pet
could engage the drive.
1. Position reel fully aft with support arms horizontal.
2. Stop engine and remove key.
Reposition center arm cylinder as follows:
NOTE: Reel components are not shown for
clarity.
3. Remove four bolts (A) securing cylinder bracket (B) to
reel arm.
4. Push reel back until bracket (B) lines up with the aft set
of holes (C).
5. Reinstall the four bolts (A) to secure bracket to reel arm
at new position.
169594
OPERATION
Figure 4.37: Center arm cylinder- Forward
position
Figure 4.38: Center arm cylinder - Rearward
position
63
Rev. C