Safety Signs; Installing Safety Decals - MacDon D65 Operator's Manual

1.7 Safety Signs

• Keep safety signs clean and legible at all times.
• Replace safety signs
become illegible.
• If original parts on which a safety sign was installed are
replaced, be sure the repair part also bears the current
safety sign.
• Safety signs are available from your Dealer Parts
Department.

1.7.1 Installing Safety Decals

To install a safety decal, follow these steps:
1. Be sure the installation area is clean and dry.
2. Decide on the exact location before you remove the decal backing paper.
3. Remove the smaller portion of the split backing paper.
4. Place the sign in position and slowly peel back the remaining paper, smoothing the sign as it is applied.
5. Small air pockets can be smoothed out or pricked with a pin.
169594
SAFETY
that are missing or
Figure 1.17: Read operator's manual before
operating
8
Rev. C