6.5 Electrical
Use electrical tape and wire clips as required to prevent wires from dragging or rubbing.
Keep lights clean and replace defective bulbs.
6.5.1 Replacing Light Bulbs
To replace a light bulb, follow these steps:
1. Using a Phillips screwdriver, remove screws (A) from
fixture and remove plastic lens.
2. Replace bulb and reinstall plastic lens and screws.
NOTE: Bulb Part Numbers:
#1156 for amber clearance lights and
#1157 for red tail light (Slow Speed
Transport option). #1156 is 21W (12V),
and #1157 is 21/5W (12V).
169594
MAINTENANCE AND SERVICING
Use Bulb Trade
136
Figure 6.24
Rev. C