Adjusting Delivery Opening On Header With Hydraulic Deck Shift - MacDon D65 Operator's Manual

4.8.2 Adjusting Delivery Opening on Header with Hydraulic Deck Shift

The delivery opening can be changed by moving the inboard deck shift stops.
1. Remove bolts (A).
2. Slide stop (B) outboard to decrease the maximum
opening size, or
maximum opening.
CAUTION
Adjust the outboard stops to prevent the decks
from contacting each other.
3. Reinstall bolts (A) and tighten.
169594
OPERATION
inboard to increase the
Figure 4.61
76
Rev. C