Registering F-Code Based Relay Boxes - Kyocera KM-C830 Operation Manual

Section 4 Other Features of this Fax

(7) Registering F-Code Based Relay Boxes

Perform the following procedure when you want to register a new
F-Code Based Relay Box.
* You can register up to 15 F-Code Based Relay Boxes in this fax
machine.
* If, for any reason, you lose reference to the F-Code password that
you register here, you will not be able to delete that box. Therefore,
you should exercise DUE CAUTION in the management of the F-
Code password that you register in this procedure.
<Caution>
While the subaddress of each F-Code Based Relay Box is created
with a 4-digit number from "0000" to "9999", the same number
CANNOT be registered as well for the subaddress of an F-Code
Confidential Box or for the box number of an Encryption Box.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode
settings.
Set Document
1. Raise the cover plate and press the Register key.
The "Program" menu will appear in the message display.
-
Program:
End
Program Abbreviated Dial
Program 1-Touch Key
2. Scroll through the menu with the cursor up or the cursor down key
and select "Program subadd.confi.box". Then press the Enter key.
Program subadd.confi.box:
Program Subad confi. box
Program Subad relay box
4-16
JUL-08-2001 12:00
3. Use the cursor down key to select "Program Subad relay box".
Then press the Enter key.
Program Subad relay box:
End
#01 1234
#02 2345
4. Scroll through the menu with the cursor up or the cursor down key
and select an unregistered box.
Program Subad relay box:
#01 1234
#02 2345
#03
5. Press the Enter key.
SubAddress:0000
Enter SubAddress.
6. Enter the subaddress that you want to use for this F-Code Based
Relay Box.
* Each subaddress is a 4-digit number from "0000" to "9999".
* If you want to reset the displayed number to "0000", simply press
the Stop/Clear key.
SubAddress:3456
Enter SubAddress.
7. Press the Enter key.
Password:0000
Enter Your Password
8. Enter the F-Code password that you want to use for this F-Code
Based Relay Box.
* The password can be up to 4 digits in length and can include any
combination of the numerals 0 - 9 and the symbols "
* If you receive an F-Code Based Relay Broadcast transmission
where your fax will act as the relay station and you have
registered "0000" as the F-Code password for the corresponding
F-Code Based Relay Box, a check of the passwords will not be
performed.
* If you want to reset the displayed number to "0000", simply press
the Stop/Clear key.
Password:0333
Enter Your Password
9. Press the Enter key.
v :
Enter Destination Station
" and "#".