Program Keys; Registering - Kyocera KM-C830 Operation Manual

Section 4 Other Features of this Fax

Program Keys

The operational procedures for various types of communication, such as Broadcast
Transmission, Polling Reception, etc., can be registered under a one-touch key that will
then function as a program key for one-touch operation. This is convenient for those
operations that are performed often – or on a regular basis – to the same destination or
at the same time each day, etc.
The following 3 methods of communication can be registered
under a program key.
A. Standard Transmission
B. Broadcast Transmission
C. Polling Reception
Entering a Fax Number for an F-Code Based Communication
* You CAN enter the same destination fax number more than
once as long as the corresponding F-Code Based Confidential
Boxes are different.
* If you enter both fax numbers with the keypad, you CAN enter
the same fax number as one that has already been entered (as
long as one number was designated for F-Code Based
Communication and the other was NOT).
* If you entered one fax number with the keypad and designate it
for F-Code Based Communication, you CAN enter the same fax
number as long as you use an abbreviated number or one-touch
key that was designated for F-Code Based Communication for
the other number.
* You CAN enter the same fax number more than once as long
as you enter the number with different abbreviated numbers or
one-touch keys that were designated for F-Code Based
Communication.
4-28
<NOTICE>
* Group dial keys cannot be used to enter fax numbers for the
communication method listed as A at left.
* Chain dial and group dial keys CANNOT be used in
combination during entry of any one fax number.
* For more detailed information on each communication method,
refer to the explanation that particular function.

(1) Registering

* You can designate any number of the 32 one-touch keys as
program keys.
* It is not necessary for you to register a name for each program.
However, if you do register a program name, you will be able to use
the directory to search for the related program.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
Set Document
1. Raise the cover plate and press the Register key.
The "Program" menu will appear in the message display.
-
Program:
End
Program Abbreviated Dial
Program 1-Touch Key
JUL-08-2001 12:00