Troubleshooting Tables - Kyocera KM-C830 Operation Manual

Section 3 Troubleshooting

Troubleshooting Tables

If you experience trouble with your fax machine, refer to the tables below for
the appropriate corrective procedures. If the trouble persists, contact your
service representative, an authorized service center or the place of
purchase.
Problem
The detected document size is
often wrong.
I am not able to send my
documents.
I am not able to perform Memory
Transmission.
3-6
Check point
Is the machine installed in a location
where it is exposed to strong light from
directly overhead, or from above and
behind?
Is the modular cord connected correctly?
Is "Communication Error." displayed?
Is Password Check Transmission turned
ON?
Is the type of phone line setting set
correctly?
Is the memory in your fax machine full?
Procedure
If the machine is installed in such a
location, document size detection may
be influenced. Consult with your service
representative, an authorized service
center or the place of purchase.
Connect the modular cord correctly.
Perform the necessary procedure to
correct the error and try to transmit the
documents again.
Turn Password Check Transmission
OFF.
Make sure the telephone line setting is
correct.
Try the Memory Transmission procedure
again after memory becomes available
or after you create available space in
memory.
Page
___
1-2
8-7
4-35
1-6
1-24
4-13
4-45