Kyocera KM-C830 Operation Manual page 96

Section 4 Other Features of this Fax
9. Press the Enter key.
Password:
Enter Your Password
10. If necessary, use the keypad and enter the predetermined F-
Code password.
* The password can be up to 20 digits in length and can include
any combination of the numerals 0 - 9 and the symbols "
and "#". You do not have to enter an F-Code password here if
you agree in advance with the destination party not to use one.
* If you DO NOT need to enter an F-Code password, proceed to
step 11.
Password:
3856
Enter Your Password
11. Press the Enter key.
* If there is some problem with the information that you entered,
an error message will appear in the message display.
In this case, press the Enter key and the message display will
return to a display that allows you to enter the destination fax
number again.
Print Here:
*On
Off
12. Use the cursor up or the cursor down key to select whether or
not you want the received documents to be printed out at this fax
machine.
* The asterisk ( ) in the message display indicates the current
*
setting. However, an asterisk will not be displayed until the
setting is changed at least one time.
* If you want to have the documents printed out at this fax,
select "On".
13. Press the Enter key.
Fax For'd Time:
*Delayed TX
All Day
14. Use the cursor up or the cursor down key to select whether or
not you want to designate a time for the Fax Forwarding
operation to begin and end.
* If you want to have only those documents received during
designated hours forwarded to another fax number, select
"Delayed TX.". If you want to have Fax Forwarding continue
indefinitely, select "All Day".
* The asterisk ( ) in the message display indicates the current
*
setting. However, an asterisk will not be displayed until the
setting is changed at least one time.
> If you selected "Delayed TX.", proceed to step 15.
> If you selected "All Day", proceed to step 19.
4-22
20 Digits
"
20 Digits
15. Press the Enter key.
Fax Forward Start Time:00:00
Program Start Time
16. Use the keypad to enter the desired time for Fax Forwarding to
begin.
* If you want to reset the displayed time to "00:00", simply press
the Stop/Clear key.
Fax Forward Start Time:09:00
Program Start Time
17. Press the Enter key.
Fax Forward Stop Time:00:00
Program Stop Time
18. Use the keypad to enter the desired time for Fax Forwarding to
end.
* If you want to reset the displayed time to "00:00", simply press
the Stop/Clear key.
Fax Forward Stop Time:17:00
Program Stop Time
19. Press the Enter key. Registration for Fax Forwarding is complete.
Program Fax Parameter:
Permit Tel No.
Permit ID No.
Fax Forwarding
20. Press the Reset key.
The operation panel will return to the initial mode settings.
P P
P P
P P