Broadcast Transmission - Kyocera KM-C830 Operation Manual

Section 2 Various Functions of this Fax

Broadcast Transmission

Broadcast Transmission allows the same documents to be
transmitted to a number of destinations one after another,
in a single operation. If, for example, you want to transmit the
same documents from a central office to multiple branch offices,
this function is quite convenient as it only requires you to
perform the transmission operation one time.
The documents you want to transmit are first entered in
memory, and dialing and transmitting operations are repeated
automatically for each destination.
* If you enter all of the destination numbers using abbreviated
numbers, one-touch keys or group dial keys, this fax can
automatically transmit the same documents to up to 132
different destinations in a single operation.
* During a Broadcast Transmission, documents will be
transmitted using the Memory Transmission mode even if the
fax is currently in the Direct Feed Transmission mode.
* When you want to transmit duplex (2-sided) documents, press
the Duplex Tx. key at any point in the procedure PRIOR to
entering the last destination fax number.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
Set Document
1. Set the documents you want to transmit in the DF or on the platen.
* When the documents are set on the platen, it is necessary,
after each page is scanned, to select whether or not you want to
transmit more pages. (Refer to page 1-23.)
Enter Destination
2. Raise the cover plate and press the Broadcast key.
-
2-4
JUL-08-2001 12:00
JUL-08-2001 12:00
1
Document:8 / x11
2
3. Enter a destination fax number.
* You can enter the fax number using the keypad,
abbreviated numbers, one-touch keys, group dial keys or
the directory.
Chain dial keys can be used as well.
v :1358
Enter Destination
If you are going to designate this fax number for as
an F-Code Based Transmission...
• You CAN enter the same destination fax number more than
once as long as the destination F-Code Boxes are different.
• If you enter both fax numbers with the keypad, you CAN enter
the same destination fax number as one that has already been
entered (as long as one number was designated for F-Code
Based Transmission and the other was NOT).
• If you entered one fax number with the keypad and designate it
for F-Code Based Transmission, you CAN enter the same
destination fax number as long as you use an abbreviated
number or one-touch key that was designated for F-Code
Based Communication for the other number.
• You CAN enter the same destination fax number more than
once as long as you enter the number with different abbreviated
numbers or one-touch keys that were designated for F-Code
Based Communication.
1
Document:8 / x11
2