Kyocera KM-C830 Operation Manual page 60

Section 2 Various Functions of this Fax
Adding fax numbers
9. Use the cursor up or the cursor down key to select "Broadcast List".
Then press the Enter key.
Broadcast List:
End
Add destination
Change/Delete
10. If you want to add fax numbers, use the cursor up or the cursor
down key to select "Add destination".
* If you DO NOT want to add fax numbers, this step is not
necessary. Proceed to step 19.
Broadcast List:
End
Add destination
Change/Delete
11. Press the Enter key.
v :
Enter Fax No.
12. Enter the additional fax number.
v :55367
Enter Fax No.
13. If you want to designate the communication for this fax number
as an F-Code Based Communication, press the Sub Address
key.
* If you DID NOT press the Sub Address key, proceed to step 16.
14. Enter the subaddress you want to use for this F-Code Based
Communication. Then press the Enter key.
* The subaddress can be up to 20 digits in length and can
include any combination of the numerals 0 - 9.
SubAddress:
66385
Enter SubAddress.
15. If necessary, enter the predetermined F-Code password.
* The password can be up to 20 digits in length and can include
any combination of the numerals 0 - 9 and the symbols "
and "#".
* If you DO NOT need to enter an F-Code password, proceed to
step 16.
Password:
3856
Enter Your Password
2-12
20 Digits
"
20 Digits
16. Press the Enter key.
* If the fax number you entered has already been registered for
this operation, an error message will appear in the message
display. In this case, press the Enter key and then proceed to
step 17.
* If you have entered too many fax numbers, an error message
will appear in the message display. In this case, press the Enter
key and then proceed to step 18.
v :
Enter Fax No.
17. Select whether or not you want to continue adding fax numbers.
> If you DO want to add more fax numbers, return to step 12.
> If you are finished adding fax numbers, proceed to step 18.
18. Press the Enter key.
* If you are finished modifying the contents of the communication,
proceed to step 36 on page 2-13.
Deleting fax numbers
19. Use the cursor up or the cursor down key to select "Change/Delete".
Broadcast List:
End
Add destination
Change/Delete
20. Press the Enter key.
Change/Delete Broadcast:
End
v :OSS
v :OKS
21. Use the cursor up or the cursor down key to select the fax
number you want to delete.
* If you DO NOT want to delete fax numbers, proceed to step 23
on page 2-13.
Change/Delete Broadcast:
v :SDS
v :TMS
v :NGYS
22. Press the Stop/Clear key. The selected fax number will be
deleted from this communication.
* If you want to continue deleting other fax numbers, repeat
steps 21 and 22 until all desired numbers have been deleted.
* If you are finished modifying the contents of the communication,
proceed to step 34 on page 2-13.
Change/Delete Broadcast:
v :SDS
v :NGYS
v :HSS