Registering Your Station Id - Kyocera KM-C830 Operation Manual

3 Registering your station ID

Your station ID is used as the password when determining
who you can send and receive faxes to and from.
* Use the following procedure as well when you want to
change information that is already registered.
* If you want to cancel the procedure part way through,
press the Reset key. The operation panel will return to the
initial mode settings.
Perform steps 1 - 4 of "1 Registering your fax number",
1
page 1-9.
Program Fax Parameter:
End
v :
Own Name
Use the cursor up or the cursor down key to select "Own ID".
2
Program Fax Parameter:
v :
Own Name
Own ID
Press the Enter key.
3
Own ID:0000
Enter ID No.
:
:
:0000
Section 1 Basic Use of this Fax
Use the keypad to enter the desired station ID (4 digits).
4
* If you want to reset the displayed number to "0000",
simply press the Stop/Clear key.
Own ID:3324
Enter ID No.
Press the Enter key.
5
Registration of your station ID is complete.
* To return to the initial mode settings, press the Reset key.
Program Fax Parameter:
v :
Own Name
Own ID
:
:3324
1-11