(3) Detaching and refitting the relay-L PWB
Procedure
1. Remove the top cover assembly.
(See page 1-5-3)
2. Pull the connectors out from relay-L
PWB and then release the wires from
hooks.
3. Remove the LSU fan motor assembly
upward.
4. Pull the connectors and FFC out and
then remove the relay-L PWB.
5. Check or replace the relay-L PWB and
refit all the removed parts.
Figure 1-5-37
Figure 1-5-38
1-5-24
2T6/2T7/2T8/2T9
LSU fan motor assembly
Hooks
Wires
Connectors
Connect-L PWB
Connectors
FFC
Hook