Kyocera KM-C830 Operation Manual page 99

7. Use the keypad to enter one of the other party's fax numbers.
* You can also enter the fax number using abbreviated numbers,
one-touch keys or the directory. Chain dial keys can be used as
well.
If you enter the fax number using an abbreviated number or
one-touch key that is already designated for F-Code Based
Communication, you can skip steps 8 through 11.
v :68572
Enter Destination
If you are going to designate this fax number for
F-Code Based Communication...
• You CAN enter the same fax number more than once as long
as the corresponding F-Code Boxes are different.
• If you enter both fax numbers with the keypad, you CAN enter
the same fax number as one that has already been entered
(as long as one number was designated for F-Code Based
Communication and the other was NOT).
• If you entered one fax number with the keypad and designate it
for F-Code Based Communication, you CAN enter the same
transmitting fax number as long as you use an abbreviated
number or one-touch key that was designated for F-Code
Based Communication for the other number.
• You CAN enter the same fax number more than once as long
as you enter the number with different abbreviated numbers or
one-touch keys that were designated for F-Code Based
Communication.
8. If you want to designate this fax number for F-Code Based
Communication, press the Sub Address key.
> If you pressed the Sub Address key, proceed to
step 9.
> If you DID NOT press the Sub Address key, proceed to step 12.
9. Use the keypad to enter the subaddress you want to use for this
F-Code Based Communication.
* The subaddress can be up to 20 digits in length and can include
any combination of the numerals 0 - 9.
SubAddress:
6635
Enter SubAddress.
10. Press the Enter key.
Password:
Enter Your Password
20 Digits
20 Digits
Section 4 Other Features of this Fax
11. If necessary, use the keypad and enter the predetermined F-
Code password.
* The password can be up to 20 digits in length and can include
any combination of the numerals 0 - 9 and the symbols "
and "#". You do not have to enter an F-Code password here if
you agree in advance with the other party not to use one.
* If you DO NOT need to enter an F-Code password, proceed to
step 12.
Password:
3856
Enter Your Password
12. Press the Enter key.
* If the fax number you entered has already been registered for
this key, an error message will appear in the message display.
In this case, press the Enter key and proceed to step 13.
* If you have entered too many fax numbers, an error message
will appear in the message display. In this case, press the Enter
key and proceed to step 14.
v :
Enter Fax No.
13. Select whether or not you want to continue registering other fax
numbers.
> If you DO want to continue registering fax numbers, return to
step 7.
> If you are finished registering fax numbers, proceed to step 14.
14. Press the Enter key. Registration of that group dial key is
complete.
> If you want to continue registering other group dial keys,
repeat steps 4 - 14.
> If you are finished registering group dial keys, press the Reset
key. The operation panel will return to the initial mode settings.
"
20 Digits
4-25