Standby Transmission - Kyocera KM-C830 Operation Manual

Standby Transmission

Standby Transmission refers to the process of preparing
documents for transmission while the fax is occupied with
another communication. If, during that communication, the
documents you want to transmit are set in the DF or on the
platen and the destination fax number is entered, those
documents will be automatically transmitted once the current
communication has been completed.
* The fax is currently occupied with a communication in the
background.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
Set Document
1. Set the documents you want to transmit in the DF or on the platen.
Enter Destination
2. Enter the destination fax number.
* You can enter the fax number using the keypad, abbreviated
numbers, one-touch keys, program keys, group dial keys or the
directory. Chain dial keys can be used as well.
v :3323
Press START key.
3. Press the Start key. The documents will be scanned into memory.
* If the fax is in the Direct Feed Transmission mode, the
documents will remain in the DF or on the platen waiting for the
transmitting operation to begin.
• Once the other communication is completed, the transmission
operation will begin automatically.
JUL-08-2001 12:00
JUL-08-2001 12:00
1
Document:8 / x11
2
1
Document:8 / x11
2
Section 2 Various Functions of this Fax
* You can schedule up to 50 Standby Transmissions
(including communications that use the timer and Interrupt
Transmissions) at one time.
* You can also designate each of the various types of fax
communication available in this fax such as Broadcast
Transmission as a Standby Transmission.
* To cancel a Standby Transmission when using the Direct
Feed Transmission mode, simply remove the documents
from the DF or the platen.
If you press the Stop/Clear key during a Standby
Transmission in the Direct Feed Transmission mode...
a message will appear in the message display in order to
check whether or not you really want to cancel the Standby
Transmission.
Continue TX:
Yes
No
1 Use the cursor up or the cursor down key to select whether or
not you want to cancel the Standby Transmission.
> If you want to continue the current Standby Transmission,
select "Yes".
> If you want to cancel the transmission, select "No".
2 Press the Enter key.
* If you do not press the Enter key, the Standby Transmission
will be canceled automatically after a designated period of
time.
2-3