Chain Dial Keys; Registering - Kyocera KM-C830 Operation Manual

Chain Dial Keys

If you register a chain dial number under a one-touch key in
advance, that one-touch key will function as a chain dial key and
the chain dial key can be used to enter the initial portion of the
other party's fax number.

(1) Registering

* You can register any number of the 32 one-touch keys for use as
chain dial keys.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode
settings.
Set Document
1. Raise the cover plate and press the Register key.
The "Program" menu will appear in the message display.
-
Program:
End
Program Abbreviated Dial
Program 1-Touch Key
2. Use the cursor up or the cursor down key to select
"Program Chain Dial".
Program:
Program Program Key
Program Group Key
Program Chain Dial
3. Press the Enter key.
Chain:
Press 1-Touch Key
JUL-08-2001 12:00
Section 2 Various Functions of this Fax
* You can only use chain dial keys once in a dialing sequence:
to enter the initial digits of the other party's fax number.
* You can use chain dial keys when entering destination fax
numbers in each of the various types of fax communication
available in this fax such as Broadcast Transmission.
* You CANNOT use chain dial keys in combination with group
dial keys or program keys.
4. Press an unregistered one-touch key.
v :
Enter Fax No.
5. Use the keypad to enter the desired chain dial number.
* The chain dial number can be up to 32 digits in length.
v :0777
Enter Fax No.
6. Press the Enter key.
Enter Chain Name
7. Enter the desired name for the chain dial key.
* The name for the chain dial key can be up to 20 characters in
length. (Refer to "Entering characters", page 1-28.)
DDL-Chicago
Enter Chain Name
8. Press the Enter key.
Registration of that chain dial key is complete.
> If you want to continue registering other chain dial keys, repeat
steps 4 - 8.
> If you are finished registering chain dial keys, press the Reset
key. The operation panel will return to the initial mode settings.
(Lower case)
2-7