Canceling A Reception; Canceling A Polling Transmission In Memory Or A Communication That Is Waiting For A Start Time - Kyocera KM-C830 Operation Manual

Section 1 Basic Use of this Fax Section 1 Basic Use of this Fax

(3) Canceling a Reception

All fax receptions are handled as operations in the background of the
message display. In order to cancel a background operation, it is first
necessary to make that operation appear in the message display.
Perform the following procedure to cancel this type of communication.
Raise the cover plate and press the Alternate Display key. The
1
background operation currently in progress will appear in the
message display.
v :07654321
01Page
Receive
Press the Stop/Clear key while you are still holding the
2
Alternate Display key down. The reception will be canceled.
* If you attempt to cancel a reception that is scheduled from
multiple transmitting faxes (such as a Polling Reception) and
there were fax machines still remaining to be received from,
a message will appear in the message display asking
whether or not you want to continue the receptions from the
remaining faxes.
> If you select "Yes", receptions will be carried out from the
remaining faxes.
> If you select "No", or if you make no selection and the Auto
Clear function engages and clears the message display,
reception from the remaining faxes will also be canceled as
well.
1-26
Doc # :001
(4) Canceling a Polling Transmission in
Memory or a Communication That is
Waiting for a Start Time
Perform the following procedure to cancel a communication that is in
memory waiting for a start time or to cancel a Polling Transmission.
* You CANNOT cancel a communication that is in memory waiting to
be forwarded to a destination fax.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
Entering the "Communication information" mode
1
Raise the cover plate and press the Information key.
The "Communication information" menu will appear in the
message display.
Communication information:
Tx result on LCD
Rx result on LCD
Edit
Use the cursor up or the cursor down key to select "Edit".
2
Communication information:
Tx result on LCD
Rx result on LCD
Edit
P P
P P