Turning Duplex Reception On/Off (Only Ayailable In Duplex Copiers); Turning Dial Confirmation On/Off - Kyocera KM-C830 Operation Manual

Turning Duplex Reception ON/OFF
(only available in duplex copiers)
With the Duplex Reception function, it is possible to print onto the
back side of received faxes. To use the Duplex Reception function, it
is necessary to turn it ON in advance.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode
settings.
Set Document
1. Raise the cover plate and press the Configure key.
Set Fax:
End
Line Type
TTI
2. Use the cursor up or the cursor down key to select "Duplex RX".
Set Fax:
PaperFeed Sel.:AutoSelect
2 in 1 RX
Duplex RX
3. Press the Enter key.
Duplex RX:
On
*Off
4. Use the cursor up or the cursor down key to select whether to turn
Duplex Reception ON or OFF.
* The asterisk ( ) in the message display indicates the current
*
setting.
5. Press the Enter key. The setting for Duplex Reception is complete.
Set Fax:
PaperFeed Sel.:AutoSelect
2 in 1 RX
Duplex RX
* If you are finished making settings, press the Reset key.
The operation panel will return to the initial mode settings.
JUL-08-2001 12:00
:Tone Dial
:Outside P.
:Off
:Off
:Off
:On
Section 6 Various Settings and Registration in this Fax

Turning Dial Confirmation ON/OFF

Dial Confirmation enables the prevention of problems associated
with mistakenly pressing the wrong one-touch, program or group dial
key. When Dial Confirmation is turned ON, you will be able to check
the destination before dialing occurs, thereby preventing your
documents from being sent to the wrong party.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
Set Document
1. Press the Configure key.
Set Fax:
2. Use the cursor up or the cursor down key to select "Dial Confirm".
Set Fax:
3. Press the Enter key.
Dial Confirm:
*Off
4. Use the cursor up or the cursor down key to select whether to turn
Dial Confirmation ON or OFF.
* The asterisk ( ) in the message display indicates the current
*
setting.
Dial Confirm:
*Off
5. Press the Enter key. The setting for Dial Confirmation is complete.
Set Fax:
* If you are finished making settings, press the Reset key.
The operation panel will return to the initial mode settings
JUL-08-2001 12:00
-
End
Line Type :Tone Dial
TTI :Outside P.
#Rings(TAD) :10Times
#Rings(AutoRX): 2Times
Dial Confirm :Off
On
On
#Rings(TAD) :10Times
#Rings(AutoRX): 2Times
Dial Confirm :On
6-9