Table of Contents
Advertisement
MorphoAccess Sigma & PC internal connection checking
From the PC Wave, it is possible to ping the MorphoAccess Sigma on the internal
network so as to verify Ethernet link is fine between both devices.
Please follow instructions below:
-
Apply "Remote PC Wave connection for maintenance" procedure to be
connected on PC.
-
Launch console application and type
If the ping is not successful, please verify power supply of MorphoAccess Sigma,
Ethernet switch, and Ethernet wire connection.
To sum up IP static IP address used on the internal Network:
Components
MorphoAccess Sigma Wave
PC Wave
NB: As a reminder, it is not possible to ping these IP address from customer network
because the internal network is isolated from the port "External" of the Ethernet switch.
This document and the information therein are the property of Morpho.
92
They must not be copied or communicated to a third party without the prior written authorization of Morpho
TM
MorphoWave
ping 169.254.169.101
Static IP address on internal network
169.254.169.101
169.254.169.102
OEM – Installation guide
Annex 1 : Maintenance
2015_2000009096 V4
May 2017
Advertisement
Table of Contents
