Safran Morpho MorphoWave OEM Installation Manual page 13

OEM – Installation guide
TM
MorphoWave
Section 1 : Introduction
Pin Code Access granted/ Access Denied
Actuation of the onboard Relay 1/2 (Based on Valid Access
Credential)
GPIO Output was verified
GPIO Input was verified.
RS422/RS485; Wiegand and Ethernet communication were
verified with a supplemental computer employing the
vendor's proprietary software MBTB. UL version 2.0.4.0.
Please note that the following functions have not been evaluated by UL LLC
USB ports and its functionality
LOGS ;
Video/ Facial Recognition/Audio functions
FIPS 201 Personal identification verification features of this
unit
The following Communication: Wi-Fi was not verified by UL. To
List the product and accept the communication protocols we
would need to evaluate the RS485, Wiegand, and Ethernet
with an UL Listed access control unit
2015_2000009096 V4
May 2017
This document and the information therein are the property of Morpho.
They must not be copied or communicated to a third party without the prior written authorization of Morpho
13