Safran Morpho MorphoWave OEM Installation Manual page 39

OEM – Installation guide
TM
MorphoWave
Section 3 : Installation Procedure
POE (Power Over Ethernet)
MorphoAccess Sigma terminal's power supply can also be provided by the Ethernet
using RJ45 connection (Power Over Ethernet mode - IEEE802.3af compliant). This mode
is only available when the optional POE module is installed in the product.
Only POE module delivered by Morpho (kit reference 293656945) may be installed in
the terminal.
The POE module shall be installed on wall-mounted product. Verify it is
well connected before power up.
2015_2000009096 V4
May 2017
This document and the information therein are the property of Morpho.
They must not be copied or communicated to a third party without the prior written authorization of Morpho
39