Table of Contents
Advertisement
OEM – Installation guide
TM
MorphoWave
Section 6 : Recommendations
Cleaning precautions
The use of a dry cloth is recommended to clean the terminal, especially the biometric
sensor. Acid liquids, alcohol or abrasive materials are prohibited.
Biometric sensor
Clean the glass every day to optimize performances of the product especially when
there is heavy dust deposit on the capture window.
Use a dry cloth to clean the terminal and the sensor. The use of acid liquids, alcohol
or abrasive materials is prohibited.
Use a dry air spray to remove the dust out of the sensor glass. Power supply
Ethernet communication
RS485/RS422 communication
2015_2000009096 V4
May 2017
DC power
supply
DC power
supply
connection
Power
supply by
POE
POE power
supply
connection
MA SIGMA family
Only RJ45 connector
MA SIGMA family
Half duplex
Full duplex
(slave and master mode)
This document and the information therein are the property of Morpho.
They must not be copied or communicated to a third party without the prior written authorization of Morpho
MA SIGMA family
12V – 24V
(-15% / +10%)
Terminal block
IEEE802.3af
compliant
Only RJ45 connector
71
Advertisement
Table of Contents
