Safran Morpho MorphoWave OEM Installation Manual page 83

MorphoWave TM OEM– Installation Guide
Annex 1 : Maintenance
3. Now the MorphoAccess Sigma Wave is ready to be shut down for future pairing.
4. On the PC side, login and erase the file below :
5. Now the PC is ready to be switched off and will be paired at the next boot to the
MorphoAccess connected on the same network.
This document and the information therein are the property of Morpho.
2015_2000009096 V4
They must not be copied or communicated to a third party without the prior written authorization of Morpho
May 2017
Click on Disassociate Sensor
Then confirm.
At this point of time, the MorphoAccess
Sigma Wave has forgotten the PC
connected.
NB: When a unpaired PC running
MorphoWave software will be connected
to the MorphoAcce Sigma Wave, a new
pairing process will be initiated.
83