Safran Morpho MorphoWave OEM Installation Manual page 23

OEM – Installation guide
TM
MorphoWave
Section 2 : General Description
Security of the terminal
Size and weight
Environmental
conditions
Certifications
2015_2000009096 V4
May 2017
Anti-tamper-pulling switches.
Tamper-pulling detection: one relay switch ("open" in
default state).
W x H x D: 150.5mm x 152.5mm x 57.5mm
(5,92" x 6,00" x 2,26")
Weight : 580g
Operating temperature -10 °C to + 55 °C (14°F to 131°F)
Operating humidity 10 % < RH < 80 % (non condensing)
Storage temperature -25 °C to + 70 °C (-13°F to 158°F)
Storage humidity 5% < RH < 95 %
IP65 rated for WR models (once wall-mounted)
The terminal should be installed in controlled lighting
conditions.
Avoid direct exposure to sunlight or to UV lights.
CE, IEC6095-1, FCC Part 15, RSS210, Issue8 : 2010, RoHS,
REACh, WEEE
This document and the information therein are the property of Morpho.
They must not be copied or communicated to a third party without the prior written authorization of Morpho
23