First Biometric Record And Identification - Safran Morpho MorphoWave OEM Installation Manual

OEM – Installation guide
TM
MorphoWave
Section 4 : First boot

First biometric record and identification

To confirm the correct setup, we suggest to perform the first biometric enrollment and
identification on your MorphoWave
connected to the network). Please follow instructions below:

Switch on the MorphoWave

For this first training, it is not required to plug external network RJ45 cable, all
operation are suitable for standalone mode.
2015_2000009096 V4
May 2017
TM
OEM (PC, biometric sensor, Ethernet switch)
This document and the information therein are the property of Morpho.
They must not be copied or communicated to a third party without the prior written authorization of Morpho
TM
OEM terminal in standalone setup (no
The MorphoAccess Sigma Wave displays the
boot screen. The boot may take few minutes
at the first launch.
Then the "First Boot Assistant" will appear to
let the user set preferences.
This screen is optional; you can bypass it
clicking on OK button.
The main screen with animation is displayed.
The system is ready to use.
For the moment the sensor light is turned off
because nobody is in the database.
Go in administration menu by clicking on on
the lock screen corner left.
By default the password is "12345". It is
recommended to change it at the first time.
55