Safran Morpho MorphoWave OEM Installation Manual page 58

This document and the information therein are the property of Morpho.
58
They must not be copied or communicated to a third party without the prior written authorization of Morpho
TM
MorphoWave
Click on the green cross bottom right to save
the user in local database.
Then go back in the main menu.
Click on the bottom left arrow to set
MorphoWave in identification mode.
Now the biometric sensor will be turned ON
waiting for one hand to acquire and provide
identification status.
OEM – Installation guide
Section 4 :First boot
2015_2000009096 V4
May 2017