Table of Contents
Advertisement
TM
MorphoWave
OEM– Installation Guide
Annex 1 : Maintenance
Ethernet switch change procedure
To replace the Ethernet switch:
Turn off the entire system (MorphoAccess Sigma Wave, MorphoWave
PC,Ethernet switch).
Unplug the Ethernet switch and replace it by the new one.
Please take care to follow Ethernet port configuration as below.
Turn on the whole system.
Once the boot procedure is finished (boot time may take several minutes depending
of the database size) the MorphoWave
identification will work if at least one user is in database.
2015_2000009096 V4
May 2017
This document and the information therein are the property of Morpho.
They must not be copied or communicated to a third party without the prior written authorization of Morpho
TM
Desktop shall have green lighting on and
TM
Desktop,
85
Advertisement
Table of Contents
